Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Solving model with several ModelNodes

Posted May 10, 2012, 8:19 a.m. EDT Results & Visualization, Studies & Solvers Version 4.2a 2 Replies

Chris Shor
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi,
I'm trying to build a model that contains several ModelNodes (sub-models). Each Node should have different properties (same geometry but I want to alter the mesh). The the Model should be solved at once.

My questions are:
How to set dependent variables (since the sub-models should not be coupled)?
How to access the solution for each ModelNode?
Are there some examples available (couldn't find anything about this in the Comsol 4.2a documentation)?

Best regards,
CS
2 Replies Last Post May 11, 2012, 3:41 p.m. EDT
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago May 11, 2012, 1:31 a.m. EDT
Hi

it often becomes difficult to find your way like that but it's possible. When you add several times a physics the dependent variables get number increments by default V, V1 V2 for 3 EC physics etc

--
Good luck
Ivar
Hi it often becomes difficult to find your way like that but it's possible. When you add several times a physics the dependent variables get number increments by default V, V1 V2 for 3 EC physics etc -- Good luck Ivar
Chris Shor
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago May 11, 2012, 3:41 p.m. EDT
Hi,
thank you that was very helpful, now I'm sure that it works :)
Best,
CS
Hi, thank you that was very helpful, now I'm sure that it works :) Best, CS

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content