Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Running Comsol generated .m file

Posted May 12, 2012, 9:14 a.m. EDT 3 Replies

Martin Hediger
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Dear Comsol users
I'm just beginning with using Comsol and I received an .m file which apparently was generated by Comsol 3.4. I'm supposed to execute this file to produce the plot which is defined therein. How do I go about to do so? I have a trial licence of Comsol Multiphysics 4.2a available. Or should I actually be executing this file with Matlab? I attached the file.
Thanks for any support on this.

Martin

Attachments:

3 Replies Last Post May 12, 2012, 2:33 p.m. EDT
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago May 12, 2012, 11:50 a.m. EDT
Hi

COMSOL V4 can only read 3.5a files I believe, sou you need to get your 3.4 translated to 3.5a by someone, or by COMSOL support (unfortunately I do not have 3.5a up running anymore ;(

--
Good luck
Ivar
Hi COMSOL V4 can only read 3.5a files I believe, sou you need to get your 3.4 translated to 3.5a by someone, or by COMSOL support (unfortunately I do not have 3.5a up running anymore ;( -- Good luck Ivar
Martin Hediger
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago May 12, 2012, 1:09 p.m. EDT
Thanks for the answer. I'll be trying to fix this.
Do you know of any overview/comparison of changes from 3.4/3.5 to 4.0, such that I could identify how I need to make the adjustments?
Thanks again.
Martin
Thanks for the answer. I'll be trying to fix this. Do you know of any overview/comparison of changes from 3.4/3.5 to 4.0, such that I could identify how I need to make the adjustments? Thanks again. Martin
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago May 12, 2012, 2:33 p.m. EDT
Hi

for 3.4 to 3.5a I do not believe there were that many, you need to find the release notes, but from 3.5 to 4, about everything. That is why I always remake my models from scratch in v4, at most I import a 3.5a and then cut and past long formulas if I have any, but all variable names (those of COMSOL) ave changed a little so it's a major task

--
Good luck
Ivar
Hi for 3.4 to 3.5a I do not believe there were that many, you need to find the release notes, but from 3.5 to 4, about everything. That is why I always remake my models from scratch in v4, at most I import a 3.5a and then cut and past long formulas if I have any, but all variable names (those of COMSOL) ave changed a little so it's a major task -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content