Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
The Voltage and Current through a component in an Electrical Circuit
Posted Jun 15, 2012, 7:24 p.m. EDT Low-Frequency Electromagnetics Version 4.2a 1 Reply
Please login with a confirmed email address before reporting spam
Hey!
I am new to COMSOL and just imported a netlist from LTspice. I was trying to see what the voltage at a certain point is. Unlike spice, however, COMSOL doesn't give me the probe function and I'm stuck on even how to get the voltage at a certain point, not to mention plot the voltage in the time domain.
Any help would be greatly appreciated!!!
I am new to COMSOL and just imported a netlist from LTspice. I was trying to see what the voltage at a certain point is. Unlike spice, however, COMSOL doesn't give me the probe function and I'm stuck on even how to get the voltage at a certain point, not to mention plot the voltage in the time domain.
Any help would be greatly appreciated!!!
1 Reply Last Post Jun 16, 2012, 3:54 a.m. EDT
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
Interesting remark, probably you need to define an I/O node at the location if you want to be able to "probe it", as such I find it valuable to send a demand to support as sugestion ofr enhancement
I cannot propose more, but perhaps someone else has though of a clever way :)
--
Good luck
Ivar
Interesting remark, probably you need to define an I/O node at the location if you want to be able to "probe it", as such I find it valuable to send a demand to support as sugestion ofr enhancement
I cannot propose more, but perhaps someone else has though of a clever way :)
--
Good luck
Ivar