Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Typo in equation in "Dynamic Electric Currents Equations" help

Please login with a confirmed email address before reporting spam

Searching for "Dynamic Electric Currents Equations" in Comsol's help system gives a page with a few equations (note: under "Theory for the Electric Currents Interface", not for the Shell interface).

The third-last equation from the bottom (equation 4-2) seems to have the sign of P incorrect, it should be a minus not a plus. (Note, for example, that the equivalent equation for frequency domain, third from top on that page, has the sign the right way around.)

Where should documentation errors be reported in general?

Comsol version: 4.2.1.166

1 Reply Last Post Sep 6, 2012, 11:33 a.m. EDT
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Sep 6, 2012, 11:33 a.m. EDT
Hi

for COMSOL to record any errors, bugs or other you must send the info to "support" see the corresponding web site, or to your local rep. Here on the Forum we are only users and cannot change anything (directly) in the soft ;)

--
Good luck
Ivar
Hi for COMSOL to record any errors, bugs or other you must send the info to "support" see the corresponding web site, or to your local rep. Here on the Forum we are only users and cannot change anything (directly) in the soft ;) -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.