Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Heat Source Expanding with time!

Please login with a confirmed email address before reporting spam

I have a model for EDM process in which I need to put an heat source which would be expanding with time. But it shows error if I give time dependent position of a point under boundary conditions. Laser example shows a moving heat source but how can I build a heat source expanding with time???

Thanks

1 Reply Last Post Feb 3, 2013, 11:46 a.m. EST
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Feb 3, 2013, 11:46 a.m. EST
Hi

if you have a transient solver you can define a function (Model - Definitions - Functions) that depends on the time. If the area is constant you need only to multiply the Heat source flux / power density value by the time, appropriately, but if your surface heating is also expanding with time, you might use a Gaussin function over the coordiates that depends on time.
Note COMSOL has a particular way to normlaise it's default Gaussian function, it's in the help but today, you must still do a search over the help to find the correcct formula

--
Good luck
Ivar
Hi if you have a transient solver you can define a function (Model - Definitions - Functions) that depends on the time. If the area is constant you need only to multiply the Heat source flux / power density value by the time, appropriately, but if your surface heating is also expanding with time, you might use a Gaussin function over the coordiates that depends on time. Note COMSOL has a particular way to normlaise it's default Gaussian function, it's in the help but today, you must still do a search over the help to find the correcct formula -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.