Modeling of a 3D Inductor
Application ID: 10299
Inductors are used in many applications for low pass filtering or for impedance matching of predominantly capacitive loads. They are used in a wide frequency range from near static up to several MHz. An inductor usually has a magnetic core to increase the inductance, while keeping its size small. The magnetic core also reduces the electromagnetic interference with other devices as the magnetic flux tends to stay within it. Because there are only crude analytical or empirical formulas available for calculating impedances, computer simulations or measurements are necessary in the design of inductors. Inductor modeling is in general more complex than the modeling of resistors and capacitors, but similar principles apply. This introductory model uses a design drawn in an external CAD software and is imported for static and frequency domain analysis in the AC/DC Module. In this tutorial, we perform the AC analysis up to computing the frequency dependent impedance.
This model example illustrates applications of this type that would nominally be built using the following products:AC/DC Module
however, additional products may be required to completely define and model it. Furthermore, this example may also be defined and modeled using components from the following product combinations:
The combination of COMSOL® products required to model your application depends on several factors and may include boundary conditions, material properties, physics interfaces, and part libraries. Particular functionality may be common to several products. To determine the right combination of products for your modeling needs, review the Specification Chart and make use of a free evaluation license. The COMSOL Sales and Support teams are available for answering any questions you may have regarding this.