Application ID: 100
A shock tube is a device for studying shock waves. Prior to starting an experiment, a diaphragm inside the tube blocks any flow. You increase the pressure on one side, such as with a compressor, and then start the flow by rupturing the diaphragm. The gas expands down the other half of the tube.
Through optical means you can observe the flow and model the action of shocks. A pressurized tube of this type can store substantial amounts of energy, allowing for the study of quite violent flows—albeit for only very short periods.
This model studies the phenomena of shock waves inside a shock tube, by setting up a model that solves for the pressure and the velocity inside the tube.
This model is included as an example in the following products:COMSOL Multiphysics®
however additional products may be needed to reproduce it. This example may be created and run using components from the following product combinations:
The combination of COMSOL® products required to model your application depends on several factors and may include boundary conditions, material properties, physics interfaces, and part libraries. Particular functionality may be common to several products. To determine the right combination of products for your modeling needs, review the Specification Chart and make use of a free evaluation license. The COMSOL Sales and Support teams are available for answering any questions you may have regarding this.