Computational Fluid Dynamics

3-Dimensional Blood Cooling Model inside a Carotid Bifurcation

R. Sikorski1 T. Merrill1
1Rowan University, Glassboro, NJ, USA
3D Modeling of Fracture Flow in Core Samples Using μ-CT Data

S. Hoyer1 U. Exner2 M. Voorn1 A. Rath3
1Department of Geodynamics and Sedimentology, University of Vienna, Austria
2Museum of Natural History, Vienna, Austria
3OMV ESG-D Production Geology, Vienna, Austria
3D Modeling of Urban Areas for Built Environment Applications Using COMSOL

J. van Schijndel1
1Eindhoven University of Technology, Eindhoven, The Netherlands
3D Simulation of Air-Glass Heat Exchange in a Set of Vials

G. Mongatti1 A. Borelli1
1Marchesini Group, Pianoro, Italy
A Computational Approach for Optimizing the First Flyer Using COMSOL Multiphysics

A.H. Aziz1 H. Pourzand1 A.K. Singh1
1Pennsylvania State University, University Park, PA, USA
A Coulomb Stress Model to Simulate Induced Seismicity Due to Fluid Injection and Withdrawal in Deep Boreholes

G. Perillo1 G. De Natale2 C. Troise2 A. Troiano2 M.G. Di Giuseppe2 A. Tramelli2
1University of Naples Parthenope, Naples, Italy
2INGV, Osservatorio Vesuviano, Naples, Italy
A Multiphysics Approach to the Modeling of Biological Prosthetic Heart Valves

A. Avanzini1 D. Battini1 M. Berardi1
1Università degli Studi di Brescia, Brescia, Italy
A Parametric Study of Shock Wave Simulations with Help of COMSOL Multiphysics

F. Ferrero1 R. Meyer1 M. Kluge1 V. Schröder1
1BAM Federal Institute for Materials Research and Testing, Berlin, Germany
A Simplified Numerical Model for Simulating Sliding Door and Surgical Staff Movement in an Operating Theater

C. Balocco1
1Dipartimento di Energetica, Università di Firenze, Firenze, Italy
A Theoretical Model for the Control of Color Degradation and Microbial Spoilage Occurring in Food Convective Drying

S. Curcio1 M. Aversa1
1University of Calabria, Department of Engineering Modeling, Rende, Cosenza, Italy
Advancements in Carbon Dioxide and Water Vapor Separations Using COMSOL

J. Knox1 K. Kittredge1 R.F. Coker1 R. Cummings1 C.F. Gomez1
1NASA - Marshall Space Flight Center, Huntsville, AL, USA
Application of COMSOL Multiphysics in the Simulation of Magnesium Refining and Production

X. Guan1 E. Gratz1 U. Pal1
1Division of Materials Science and Engineering, Boston University, Brookline, MA, USA
Assessing the Potential of Ventilated Facades on Reducing a Buildings’ Thermal Load Using Decoupled COMSOL Simulations

J. van Schijndel1 C. van Dronkelaar1
1Eindhoven University of Technology, Eindhoven, The Netherlands
Assessment of Anterior Spinal Artery Blood Flow following Spinal Cord Injury

M. Alshareef1 A. Alshareef2 V. Krishna3 M. Kindy3 T. Shazly4
1College of Medicine, Medical University of South Carolina, Charleston, SC, USA
2Department of Biomedical Engineering, Duke University, Durham, NC, USA
3Department of Neurosurgery, Medical University of South Carolina, Charleston, SC, USA
4Department of Mechanical Engineering, University of South Carolina, Columbia, SC, USA
Building Energy Simulation Using the Finite Element Method

J. van Schijndel1
1Eindhoven University of Technology, Eindhoven, The Netherlands
Calibration of MHD Flow Meter using COMSOL Multiphysics

S. Sahu1 R. P .Bhattachryay1 E. R. Kumar1
1Institute for Plasma Research, Bhat, Gandhinagar, Gujarat, India.
Comparative Numerical Studies of Scramjet Inlet Performance Using k-ε Turbulence Model with Adaptive Grids

V. Gopal1 R. Kolluru1
1BMS College of Engineering, Bangalore, Karnataka, India
Comparison Between Turbulent and Laminar Bubbly-Flow for Modeling H2/H2O Separation

E. Amores Vera1 J. Rodríguez Ruiz1
1Centro Nacional del Hidrógeno, Puertollano, Spain
Computational Modeling and Simulation of the Human Duodenum

B. Hari1 S. Bakalis1 P. Fryer1
1The University of Birmingham, School of Chemical Engineering, Edgbaston, Birmingham, United Kingdom
Computationally Assisted Design and Experimental Validation of a Novel ‘Flow-Focussed’ Microfluidics Chip for Generating Monodisperse Microbubbles

M. Conneely1 V. Hegde2 H. Rolfsnes1 A. Mason2 D. McLean1 C. Main1 F.J.D. Smith2 W.H.I. McLean2 P.A. Campbell1
1Carnegie Physics Laboratory, University of Dundee, Dundee, Scotland, United Kingdom
2Division of Molecular Medicine, University of Dundee, Dundee, Scotland, United Kingdom
COMSOL Computational Fluid Dynamics for Microreactors Used in Volatile Organic Compounds Catalytic Elimination

M. Olea1 S. Odiba1 S. Hodgson1 A. Adgar1
1School of Science and Engineering, Teesside University, Middlesbrough, United Kingdom
COMSOL Multiphysics: Innovative Design and Engineering

S. Wang1
1Department of Mechanical Engineering, Kun Shan University of Technology, Tainan, Taiwan
Coupled Electric-Thermal-Fluid Analysis of High Voltage Bushing

G. Eriksson1
1ABB, Corporate Research, Västerås, Sweden
Coupling Heat Transfer in Heat Pipe Arrays with Subsurface Porous Media Flow for Long Time Predictions of Solar Rechargeable Geothermal Systems

P. Oberdorfer1 R. Hu1 M. Azizur Rahman1 E. Holzbecher1 M. Sauter1 P. Pärisch2
1Applied Geology, Geoscience Centre, University of Göttingen, Göttingen, Germany
2Institute for Solar Energy Research Hameln/Emmerthal (ISFH), Emmerthal, Germany
Cryogenic Heat Sink for Helium Gas Cooled Superconducting Power Devices

L. Graber1 N.G. Suttell1 D. Shah1 D.G. Crook1 C.H. Kim1 J. Ordonez1 S. Pamidi1
1Center for Advanced Power Systems, Florida State University, Tallahassee, FL, USA
Deposition of Submicron Charged Spherical Particles in the Trachea of the Human Airways

H.O. Åkerstedt1
1Luleå University of Technology, Luleå, Sweden
Design and Simulation of Piezoelectric Micropump and Microvalve based Drug Delivery System

D. Samajdar1 P. Podder1 A. Bhattacharyya1 S. Sen1
1Institute of Radio Physics and Electronics, University of Calcutta, Kolkata, WB, India
Design of a Controlled Dosing Scheme for Liquids using a Venturi

M. Dagaonkar1 V. Kumaran1 R. Venkataraghavan1 D. C. Franklin1
1Unilever R&D, Bangalore, Karnataka, India
Determination and Verification of the Forchheimer Coefficients for Ceramic Foam Filters using COMSOL CFD Modeling

M.W. Kennedy1 K. Zhang1 J.A. Bakken1 R.E. Aune1
1Norwegian University of Science and Technology, Trondheim, Norway
Dynamics of a Sessile Droplet Evaporation

G. Marinaro1 A. Accardo1 E. Di Fabrizio1
1Istituto Italiano di Tecnologia, Nanostructures Department, Genova, Italy
Evaluation of Internal Electrical Heater for Pipe Temperature Control Using FEA Model

B. Xu1 M. Heydrich1 S. Edmondson1 A. Jahangir 1
1ShawCor Ltd., Toronto, ON, Canada
Experimental Validation of Model of Electro-Chemical-Mechanical Planarization (ECMP) of Copper

J. Ebert1 S. Ghosal1 A. Emami-Naeini1
1SC Solutions, Sunnyvale, CA, USA
Flare System Pressure Drop Calculations Using COMSOL

K. Alhazza1 B. Albusairi1 H. Kamal1 H.M.S. Lababiedi1 A.A. Abbas2
1Kuwait University, Kuwait City, Kuwait
2Petrochemical Industries Company, Kuwait City, Kuwait
Flow of Dry Foam in a Pipe

M. Divakaran1 S. K. Gupta1
1Department of Chemical Engineering, Indian Institute of Science, Bangalore, Karnataka, India
Fracture-Matrix Flow Partitioning and Cross Flow: Numerical Modeling of Laboratory Fractured Core Flood

R. Sanaee1 G.F. Oluyemi1 M. Hossain1 B.M. Oyeneyin1
1Robert Gordon University, Aberdeen, United Kingdom
Geometric Modeling and Numerical Simulation of Airfoil Shapes Using Integrated MATLAB® and COMSOL Multiphysics

A. Safari1 H. Lemu G.1 H. Severson1
1University of Stavanger, Stavanger, Norway
Geometric Optimization of Micromixers

M. Jain1 A. Rao1 K. Nandakumar1
1Cain Department of Chemical Engineering, Louisiana State University, Baton Rouge, LA, USA
Gravitational Collapse of Rectangular Granular Piles

M.H. Babaei1 T. Dabros2 S.B. Savage3
1Ocean, Coastal, and River Engineering, National Research Council of Canada, Ottawa, ON, Canada
2Natural Resources Canada, CanmetENERGY, Devon, AB, Canada
3Department of Civil Engineering & Applied Mechanics, McGill University, Montreal, QC, Canada
Heat Transfer Modeling of Steam Methane Reforming

E. Carcadea1 M. Varlam1 I. Stefanescu1
1National Research Institute for Isotopic & Cryogenic Technologies, Rm.Vâlcea, Romania
Innovating New Products using Multiphysics Modeling

Investigation of Blade Profiles of Vertical Axis Wind Turbine by Numerical Simulation

S. Yoshioka1
1Ritsumeikan University, Kusatsu City, Shiga, Japan
Irrotational Motion of an Incompressible Fluid Past a Wing Section in an Unbounded Region

J. Russell1
1Florida Institute of Technology, Melbourne, FL, USA
Keyhole Formation During Spot Laser Welding: Heat and Fluid Flow Modeling in a 2D Axisymmetric Configuration

M. Courtois1 M. Carin2 P. LeMasson2 S. Gaied 1
1ArcelorMittal, Global R&D, Montataire, France
2LIMATB Laboratory, Université de Bretagne Sud, Lorient, France
Low Pt Cathodes for High Performance PEMFCs: Modeling and Experiments

F. Daouda1 J. Hamelin1 P. Benard1 S. Kumar Natarajan 1
1Insitut de recherche sur l'hydrogène, Université du Québec à Trois-Rivières, Trois-Rivières, Québec, Canada
Miscible Viscous Fingering: Application in Chromatographic Columns and Aquifers

S. Pramanik1 G. L. Kulukuru1 M. Mishra1
1Indian Institute of Technology Ropar, Rupnagar, Punjab, India
Modeling Fluid-Induced Porous Scaffold Deformation

J. Podichetty Thribhuvan1 S.V. Madihally1
1Oklahoma State University, Stillwater, OK, USA
Modeling Large-Scale Mine Dewatering by Using Subsurface Flow Module in COMSOL Multiphysics

J. Molinero1 A. Nardi1 P. Trinchero1
1Amphos 21, Barcelona, Spain
Modeling Magnetic Configurations for Improved Separations of Magnetic and Non-Magnetic Materials

S. Khushrushahi1 T.A. Hatton1 M. Zahn1
1Massachusetts Institute of Technology, Cambridge, MA, USA
Modeling of HTPEM Fuel Cell Start-Up Process by Using COMSOL Multiphysics

Y. Wang1 D. Uwe Sauer1
1Electrochemical Energy Conversion and Storage Systems, Institute for Power Electronics and Electrical Drives (ISEA), RWTH Aachen University, Aachen, Germany
Modeling of Laminar Flow Static Mixers

N. Elabbasi1 X. Liu1 S. Brown1 M. Vidal2 M. Pappalardo2
1Veryst Engineering LLC, Needham, MA, USA
2Nordson EFD, East Providence, RI, USA
Modeling of the Reduction Stage during the Continuous Refining of Copper in a Packed Bed Reactor

F. Mansilla1 L. Voisin 2
1Advanced Mining Technology Center, Chile University, Santiago, Chile
2Department of Mining Engineering, Advanced Mining Technology Center, Chile University, Santiago, Chile
Modeling Pit Lake Flooding After Mine Closure

S. Jordana1 A. Nardi1
1Amphos 21, Barcelona, Spain
Modeling Void Drainage with Thin Film Dynamics

J.J. Gangloff Jr.1 W.R. Hwang2 S.G. Advani1
1Center for Composite Materials, Department of Mechanical Engineering, University of Delaware, Newark, DE, USA
2School of Mechanical Engineering, Gyeongsang National University, Jinju, Gyeongsangnam-do, Korea
Modelling and Simulation of Single Phase Fluid Flow and Heat Transfer in Packed Beds using COMSOL Multiphysics

S. Sachdev1 S. Pareek1 B. Mahadevan1 A. Deshpande1
1Department of Chemical Engineering, BITS Pilani Goa Campus, Zuarinagar, Goa, India
Multiphysics Modeling of a Metal Foam

B. Chinè 13 M. Monno2
1Laboratorio MUSP, Macchine Utensili e Sistemi di Produzione, Piacenza, Italy
2Politecnico di Milano, Dipartimento di Meccanica, Milano, Italy
3Instituto Tecnologico de Costa Rica, Cartago, Costa Rica
Multiphysics Process Simulation of Static Magnetic Fields in High Power Laser Beam Welding of Aluminum

M. Bachmann1 V. Avilov1 A. Gumenyuk1 M. Rethmeier1
1BAM Federal Institute for Materials Research and Testing, Berlin, Germany
Multiphysics Simulation of a Circular-Planar Anode-Supported Solid Oxide Fuel Cell

K. Daneshvar1 A. Fantino1 C. Cristiani1 G. Dotelli1 R. Pelosato1 M. Santarelli2
1Politecnico di Milano, Dipartimento di Chimica, Materiali e Ingegneria Chimica “G. Natta”, Milano, Italy
2Politecnico di Torino, Dipartimento di Energetica, Torino, Italy
Multiphysics Simulations of Granular Sludge on the Optimization of Effluent Treatment Plant

S. Gunsekaran 1 R. C. Thiagarajan1
1ATOA Scientific Technologies Private Limited, Bangalore, India
Numerical Analysis of Conjugate Heat Transfer in Foams

N. Bianco1 R. Capuano1 W.K.S. Chiu2 S. Cunsolo1 V. Naso1 M. Oliviero1
1DETEC, Università degli Studi Federico II, Napoli, Italy
2Department of Mechanical Engineering, University of Connecticut, Storrs, CT, USA
Numerical Aspects of the Implementation of Artificial Boundary Conditions for Laminar Fluid-Structure Interactions

C. Boeckle1 P. Wittwer1
1University of Geneva, Geneva, Switzerland
Numerical Investigation of Non-Newtonian Laminar Flow in a Curved Tube with Insert

A. Kadyyrov1
1Research Center for Power Engineering Problems, KSC, RAS, Russia
Numerical Investigation of the Convective Heat Transfer Enhancement in Coiled Tubes

L. Cattani1
1Dipartimento di Ingegneria Industriale, Università degli Studi di Parma, Parma, Italy
Numerical Modeling and Performance Optimization Study of a Diaphragm Pump for Medical Application

I. Lupelli1 P. Gaudio1 A. Malizia1 R. Quaranta1
1Department of Industrial Engineering, University of Rome “Tor Vergata”, Roma, Italy
Numerical Modeling of Powder Flow During Coaxial Laser Direct Metal Deposition: Comparison Between Ti-6Al-4V Alloy and 316L Stainless Steel

S. Morville1 M. Carin1 D. Carron1 P. Le Masson1 M. Gharbi2 P. Peyre2 R. Fabbro2
1Université de Bretagne-Sud/UEB-LIMATB, Lorient, France
2PIMM, Arts et Métiers ParisTech, Paris, France
Numerical Simulation of Oil Recovery by Polymer Injection using COMSOL

J. Wegner1 L. Ganzer1
1Clausthal University of Technology, Clausthal, Germany
Numerical Study and Simulation in COMSOL Multiphysics of the Dilution Process during Dust Sampling in Dry Machining

B. Wenga-Ntcheping1 A. Djebara1 R. Kamguem1 J. Kouam1 V. Songmene1
1University of Quebec-École de Technologie Supérieure, Montreal, Canada
Numerical Study of a DC Electromagnetic Liquid Metal Pump: Limits of the Model

N. Kandev1
1Institut de recherche d'Hydro-Québec, Shawinigan, QC, Canada
Numerical Study of Navier-Stokes Equations in Supersonic Flow over a Double Wedge Airfoil using Adaptive Grids

V. Gopal1 R. Kolluru1
1BMS College of Engineering, Bangalore, Karnataka, India.
Particle Tracing: Analysis of Airborne Infection Risks in Operating Theatres

P. Apell1 S. Hjalmarsson1 T. Lindberg1 I. Wernström1 Y. Tarakonov1 A. Erichsen Andersson2 M. Karlsteen1
1Department of Applied Physics, Chalmers University of Technology, Göteborg, Sweden
2Sahlgrenska University Hospital, Department of Anesthesia, Surgery and Intensive Care, Göteborg, Sweden
Passive Cooling of Power Electronics: Heat in the Box

M. Berger1 W. Schernus1
1West Coast University of Applied Sciences, Heide, Germany
Pore-Scale Simulation of Two-Phase Flow with Heat Transfer Through Dual-Permeability Porous Medium

H.A. Akhlaghi Amiri1 A.A. Hamouda1
1University of Stavanger, Stavanger, Rogaland, Norway
Possibility of Implicit LES for Two-Dimensional Incompressible Lid-Driven Cavity Flow Based on COMSOL Multiphysics

M. Hashiguchi1
1Keisoku Engineering System Co., Ltd. Chiyoda-ku, Tokyo, Japan
Predicting the Retention Time of Nuclear Reaction Products in the PSI Recoil Chamber Using COMSOL Multiphysics

R. Dressler1 R. Eichler1
1Paul Scherrer Institute, Villigen, Switzerland
Pressure Drop CFD Modeling in Spacer-Filled Channels for TFF Ultrafiltration

Y. Zou1
1EMD Millipore Corporation, Bedford, MA USA
Simplified Numerical Model of an Axial Impeller

A.-M. Georgescu1 S.-C. Georgescu2
1Hydraulics and Environmental Protection Department, Technical University of Civil Engineering, Bucharest, Romania
2Hydraulics Department, University “Politehnica”, Bucharest, Romania
Simulation and Analysis of Two Fans Air Speed Match Design in Off-Road Mine Tract Generator Using COMSOL

Y. Shen1 D. Wu1
1Beijing University of Science & Technology, Beijing, China
Solar Cell Cooling and Heat Recovery in a Concentrated Photovoltaic System

M. Cozzini1
1Fondazione Bruno Kessler (FBK), Renewable Energies and Environmental Technologies (REET) Unit, Trento, Italy
The Use of CFD to Simulate Turbulent Flows in Laboratory and Full Scale Flocculation Processes

A.H. Ito1 O.T. Kaminata 1 S.R. Lautenschlager1
1State University of Maringá, Maringá, Paraná, Brazil
Thermal Adversity in Solid-State Lighting

T. Dreeben1
Thermal and Fluid Dynamics Studies Applied to Steel Industry

G. Tracanelli1 M. Culos1
1Studio di Ingegneria Industriale Tracanelli, San Vito al Tagliamento, Italy
Thermal Hydraulic Study for Heavy Liquid Metal Flows using COMSOL Multiphysics

K. T. Sandeep1 S. Sahu1 V. C. Chaudhari1 R. P. Bhattacharyay1 E. R. Kumar1
1Institute for Plasma Research, Gandhinagar, Gujarat, India
Thermo-Fluid Dynamics FEM Simulation of Advanced Water Cold Plates for Power Electronics

N. Delmonte1 F. Giuliani1 P. Cova1
1Dipartimento di Ingegneria dell'Informazione, Università degli Studi di Parma, Parma, Italy
Thermo-Fluid Dynamics of Flue Gas in Heat Accumulation Stoves: Study Cases

D. Rossi1 P. Scotton1
1University of Padova, Department of Geosciences, Padova, Italy
Turbulent Bounded Flows for Oil & Gas Industry with COMSOL CFD Module

A. Fadel1 G. Fontana1
1Isoil Impianti, Albano S. Alessandro, Italy
Turbulent Compressible Flow in a Slender Tube

K.O. Lund1 C.M. Lord2
1Kurt Lund Consulting, Del Mar, CA, USA
2Lord Engineering Corp., Encinitas, CA, USA
Two Dimensional Blood Shear Modeling in a Blood Cooling Catheter

R. Sikorski1 B. Chapman1 T. Merrill1
1Rowan University, Glassboro, NJ, USA
Two-Phase Flow and Multiphysics Simulations in COMSOL

Using a Level-Set Model to Estimate Dwell Time in a Vacuum Dewatering Process for Paper

K. Rezk1
1Department of Energy, Environmental and Building Technology, Karlstad University, Kronoparken, Sweden
Using CFD to Predict the Performance of Innovative Wind Power Generators

D. Allaei1
1Sheer Wind Inc., Chaska, MN, USA
Ventilation System of a Microwave Assisted Drying Kiln

A.-G. Ghiaus1 M.-A. Istrate1 A. Georgescu1
1Technical University of Civil Engineering, Bucharest, Romania
Wind Flow Modeling of Area Surrounding the Case Western Reserve University Wind Turbine

M. Fernandes1 D. Matthiesen1
1Case Western Reserve University, Cleveland, OH, USA
Back to top
Share it on Social Media: