M. Zampolli, N. Malm, and A. Tesei
NURC NATO Research Centre, La Spezia, Italy
COMSOL AB, Stockholm, Sweden
Perfectly matched layers (PML) are an efficient alternative for emulating the Sommerfeld radiation condition in the numerical solution of wave radiation and scattering problems. The key ingredient of the PML formulation is the complex scaling function, which controls the anisotropic damping of the PML. The objective of this study is to propose a modified complex scaling function capable of ...
H. Conrad, T. Klose, T. Sandner, D. Jung, H. Schenk, and H. Lakner[1,2]
Semiconductor and Microsystems Technology Laboratory, Technische Universität Dresden, Germany
Fraunhofer Institute for Photonic Microsystems Dresden, Germany
Within this paper the so called “birth and death” method is demonstrated in use with COMSOL Multiphysics®. With this method the free and reactionless movement of a solid structure on deformed geometries and the activation of this solid structure at later simulation steps is possible. For demonstrating the benefit, this method was applied to simulate the thermal induced ...
H. Bakhtiary, F. Hayer, H. Venvik, A. Holmen
Norwegian University of Science and Technology Trondheim
Methanol synthesis is a typical reaction in heterogeneous catalysis. In this work, we have studied a laboratory fixed-bed reactor packed with a Cu/Zn/Al2O3 catalyst in both adiabatic and isothermal tubular operational modes. A methanol synthesis kinetic model was implemented in COMSOL Reaction Engineering Lab. Both 1D and 2D pseudo-homogeneous dispersion models were applied to describe the mass ...
Simulation of Production Processes using the Multiphysics Approach: The Electrochemical Machining Process
R. van Tijum
Advanced Technology Center, Philips Consumer Lifestyle, Drachten, The Netherlands
Redmer van Tijum studied Applied Physics at the University of Groningen. In 2006, he received his PhD title on ‘Interface and surface roughness of polymer metal laminates’ in the field of Material Science at the University of Groningen. After that he became research and development engineer at Philips, where he focussed his attention on the improvement of production processes mainly ...
Institut für Automatisierungstechnik, Otto-von-Guericke Universität, Magdeburg, Germany
Preparative chromatography is an important separation method where the simulated moving bed (SMB) technology is an increasingly used separation process for binary mixtures. Several chromatographic columns are arranged in a ring where the feedings and drains are changed cyclically to maintain a continuous separation. For this reason, an adaptive controller is proposed to adjust the flow rates ...
H. Schmidt[1,2], and J. Hattel
Technical University of Denmark, Kgs. Lyngby, Denmark
HBS Engineering, Frederiksberg, Denmark
Two friction stir welding models are presented – a global thermal model using the temperature dependent heat source and a local material flow and heat generation model allowing for detailed investigation of different contact conditions. The two models are coupled into a larger local-global model. The flow model includes frictional dissipation from the contact between the work piece and the ...
H. Lorenzen, J. Timmerberg, and S. Mylvaganam
Department of Electrical Engineering, UAS OOW, Wilhelmshaven, Germany
Department Technology/Engineering, Telemark University College, Porsgrunn, Norway
Efforts involving simulation of transmission line networks necessitate the accurate values of the parameters of the lines. In this paper, as an attempt in estimating such parameters, the parameters of high voltage asymmetric power lines are calculated. In the process of estimation, the three phase equivalent circuit model is used. The resistance and inductance of such lines are dependent ...
Advanced Modeling of Friction Stir Welding – Improved Material Model for Aluminum Alloys and Modeling of Different Materials with Different Properties by Using the Level Set Method
Wilhelm Gronbach GmbH, Wasserburg a. Inn, Germany
Friction Stir Welding (FSW) has gained much importance throughout the last years. Beside comprehensive experimental work that has been carried out, the simulation of the welding zone is of major interest. Due to the high strains observed within the welding zone, the Eulerian (CFD) approach seems to be the most promising for the prediction of flow around the FSW tool. However, the CFD ...
F. Van den Abeele, J. Vande Voorde, and P. Goes
ArcelorMittal Research & Development Industry Gent, Zelzate, Belgium
Vortex-induced vibration is a major cause of fatigue failure in submarine oil and gas pipelines and steel catenary risers. Even moderate currents can induce vortex shedding. In this paper, COMSOL Multiphysics is applied to study the flow pattern around submarine pipeline spans, and predict the amplitude and frequency of the vortex induced vibrations. The sensitivity of the computational fluid ...
T. Müller, A. Schwenger, and H. Haase
Institut für Grundlagen der Elektrotechnik und Messtechnik, Leibniz Universität Hannover, Germany
Volkswagen AG, Germany
This paper describes the automatic optimization of an electromagnetic actuator using a genetic algorithm. The actuator modeled here is dedicated for charge changing valve actuation in internal combustion engines. In the first step of the simulation, several operating points are calculated using the script language of COMSOL Multiphysics. In order to reduce computation time, only one segment of ...