Toyota Research Institute of North America, Ann Arbor, Michigan, USA
This paper is focused on topology optimization of heat transfer and fluid flow systems for multiphysics objectives. Specifically, COMSOL Multiphysics software is coupled with a method of moving asymptotes optimizer in a custom COMSOL / MATLAB script. Various physical process including conduction, convection-diffusion, and Navier-Stokes flow are considered. To illustrate the method, a standard ...
R. E. White, and Long Cai
R.E. White & Associates LLC, Columbia, South Carolina, USA
Department of Chemical Engineering, University of South Carolina, Columbia, South Carolina, USA
The existing lithium ion battery model in COMSOL’s Multiphysics software is extended to include the thermal effects. The thermal behavior of a lithium ion battery is studied during the galvanostatic discharge process with and without a pulse. The existing lithium ion battery model in COMSOL 3.5a is extended by adding an energy balance and the temperature dependence of properties of ...
D. Groulx, and W. Ogoh
Mechanical Engineering Department, Dalhousie University, Halifax, Nova Scotia, Canada
One way of storing thermal energy is through the use of latent heat energy storage systems. One such system, composed of a cylindrical container filled with paraffin wax, through which a copper pipe carrying hot water is inserted, is presented in this paper. It is shown that the physical processes encountered in the flow of water, the heat transfer by conduction and convection, and the phase ...
M.W. Siebert, and P.S. Fodor
Physics Department, Cleveland State University, Cleveland, Ohio, USA
In this work, the fluid flow over a 2D backward-facing step is analyzed in order to provide a case study for the use of different models for the blood dynamic viscosity in COMSOL Multiphysics. Three non-Newtonian models, as well as the Newtonian model are used to study the shear stresses and the reattachment length as a function of the fluid speed. The non-Newtonian models used in this study are ...
M. Carrizales, and L.W. Lake
The University of Texas at Austin, University Station, Austin, Texas, USA
Introducing heat to the formation has proven to be an effective way of lowering the oil viscosity of heavy oils by raising the temperature in the formation. The application of electrical energy has gained more interest during the last decade because it offers fewer restrictions for its successful application compared to the conventional steam flooding methods. Although this recovery technique ...
S. Sihn[1,2], and A.K. Roy
Air Force Research Laboratory, Wright-Patterson Air Force Base, Dayton, Ohio, USA
University of Dayton Research Institute, Dayton, Ohio, USA
COMSOL Multiphysics was used to solve a phonon Boltzmann transport equation (BTE) for nanoscale heat transport problems. One dimensional steady-state and transient BTE problems were successfully solved based on finite element and discrete ordinate methods for spatial and angular discretizations, respectively, by utilizing the built-in feature of the COMSOL, Coefficient Form of PDE.
Professor of Mechanical Engineering,
University of Nevada - Las Vegas
Using COMSOL 3.5a, a set of benchmark problems requiring the use of the COMSOL Computational Fluid Dynamics (CFD) module has been simulated. Several of the problems include fluid-heat transfer interactions (Computational Heat Transfer - CHT). The four problems are: flow over a 2-D circular cylinder compressible flow in a shock tube incompressible heated flow over a 2-D backward facing step ...
B. L. Crossley, M. Kossler, P.J. Collins, R. A. Coutu Jr., and L. A. Starman
Air Force Institute of Technology, Wright-Patterson AFB, Ohio, USA
Carbon nanotubes (CNTs) have been proven experimentally to be well suited for field emission applications. An optimized triode configured CNT field emission array is developed using the COMSOL Multiphysics Electrostatics Application to adjust five key physical dimensions to investigate the effects on the enhanced electric field at the CNT emitter tips. The five dimensions studied are CNT ...
Etrema Products, Inc., Ames, Iowa, USA
Accurate modeling of magnetostrictive materials and devices requires coupling of electrical, magnetic, mechanical, and possibly acoustic domains. There are relatively few finite element software packages that include all these physical models and even fewer that include magnetostrictive models. Comsol Multiphysics was used to create linear magnetostrictive models with fully coupled ...
Pennsylvania State University Electro-Optics Center, Freeport, Pennsylvania, USA
We demonstrate the use of COMSOL Multiphysics with MATLAB to model signal generation in wide-bandgap semiconductor radiation detectors. A quasi-hemispherical detector design is compared with a simple, planar detector. Results show that the quasi-hemispherical design can simply and effectively compensate for the poor hole transport of most compound semiconductor materials. In this paper we ...