J. Biggs, P. VonLockette, and S. Lofland
Rowan University, Glassboro, New Jersey
Magnetorheological Elastomers (MREs) are a composite that consist of magnetic micrometer sized particles suspended within rubber matrix filler. By placing this material within an external magnetic field during the rubber curing process, the poles of the particles are forced to align and form chains of particles within the matrix. These chains cause the MRE to change its stiffness properties when ...
A. Jeremic, T. Farncombe, S. Liu, and Y. Abdul-Rehman
Department of Electrical and Computer Engineering, McMaster University, Hamilton, Ontario, Canada
Department of Radiology, McMaster University, Hamilton, Ontario, Canada
Single photon emission computed tomography (SPECT) is a nuclear medicine imaging technique that uses gamma rays. It has been especially useful for bone scans, cardiac perfusion imaging, tumor scans and brain imaging. The main advantage of SPECT imaging is that it can target particular tissue receptors allowing one to focus on the imaging of the diseased tissue. In most cases Monte Carlo ...
C. Belavý, G. Hulkó, K. Ondrejkovic, and P. Zajícek
Institute of Automation, Measurement and Applied Informatics, Faculty of Mechanical Engineering, Slovak University of Technology in Bratislava, Bratislava, Slovak Republic
In the paper distributed parameter system models in the form of lumped-input/distributed-output systems are introduced and modeling of temperature fields of the die in the benchmark casting plant is presented. Temperature fields were modeled and studied using a finite element method based software package COMSOL Multiphysics and numerical models in the form of a lumped-input/distributed-output ...
C. Wang, Y. Song, Y. Parikh, and J.H. Yang
Department of Mechanical & Materials Science Engineering, Florida International University, Miami, Florida, USA
Enzymatic biofuel cells (EBFCs) are miniature implantable power sources, which use enzymes as catalysts to perform redox reaction with biological fuels such as glucose. In this study, we focused on a three dimensional EBFC chip with highly dense micro-electrode arrays, fabricated by carbon-micro-electro-mechanical-system (C-MEMS) techniques. Glucose oxidase (GOx) is immobilized on anodes for the ...
S. Ali, and M. McShane
Department of Biomedical Engineering, Texas A&M University-College Station, Texas, USA
With the rising predominance of diabetes, successful management of blood glucose levels is increasingly important. Key efforts have focused on the development of optical microscale glucose sensing systems based on the encapsulation of glucose oxidase within microspheres coated with polyelectrolyte multilayer nanofilms. A two-substrate mathematical model of microscale optical glucose sensors in ...
O. Meneghini, and S. Shiraiwa
Plasma Science and Fusion Center, Massachusetts Institute of Technology, Massachusetts, USA
Fusion is a form of nuclear energy which has impressive advantages from the point of view of fuel reserves, environmental impact and safety. If successful, fusion energy would ensure a safe, resource conserving, environmentally friendly power supply for future generations. In a world wide cooperation to achieve this goal, seven parties including Europe, Japan, Russia, USA, China, South-Korea and ...
Viscous damping of a periodic perforated MEMS microstructure when the Reynolds’ equation cannot be applied: Numerical simulations
D. Homentcovschi, and R.N. Miles
Department of Mechanical Engineering, SUNY Binghamton, NY
This paper develops a computational model for determining the total damping coefficient for a unit cell of a MEMS microscale device containing a repetitive pattern of holes. The basic cell of the microstructure is approximated by an axi-symmetric domain and the velocity and pressure fields are determined from solutions of the Navier-Stokes equations using the finite element software package ...
G. Bonmassar, and A. Golby
AA. Martinos Center, Massachusetts General Hospital, Charlestown, Massachusetts, USA
Department of Neurosurgery, Brigham and Women’s Hospital, Boston, Massachusetts, USA
A new type of MRI compatible intracranial electrode based on Polymer Thick Film (PTF) is presented and studied using COMSOL Multiphysics. The geometry considered was a two-dimensional cross section cut of 5 mm thick electrodes with 5 cm leads on top of a 2×10 cm slab representing Gelfilm, or the substrate. The resistive leads were compared with metallic leads to estimate the ...
C. Bouchot, and M.A. Valenzuela
Instituto Politécnico Nacional-ESIQIE, México D.F, México
A general purpose stainless steel micro reactor setup for methane conversion is being designed for research purposes. We intend to design and build a modular device that would be able to manage different types of reactions depending on the installed modules. The device should be able to allow the study of gas phase reactions at low (atmospheric) and high pressures (up to 20 MPa), with the ...