P. Patel, P. Vaidya, G. Singh
Indian Institute of Technology Bombay, Mumbai, Maharashtra, India
Indian Oil Corporation Limited, Faridabad, Haryana, India
This paper presents a simulation approach to develop a model for understanding the mixing phenomenon in a stirred vessel. The mixing in the vessel is important for effective chemical reaction, heat transfer, mass transfer and phase homogeneity. In some cases, it is very difficult to obtain experimental information and it takes a long time to collect the data. Such problems can be solved using ...
Rensselaer Polytechnic Institute, Troy, NY, USA
A model was developed to simulate the reaction, concentration field, flow field, and temperature distribution inside a Claus reactor for converting hydrogen sulfide to sulfur. The model considered two ideal reactors, a continuous stirred tank reactor and a plug flow reactor. As expected, two ideal reactors showed much different behaviors in terms of reactant conversion and operating ...
Danish Technological Institute, Aarhus C, Denmark
The use of the finite element method for understanding and analyzing the freezing and drying processes of food products is in focus in this paper. The objective of this study is to develop a model that can predict temperature distribution and weight loss of food products during the freezing and drying processes. The problem was solved by utilizing heat, mass transfer and moving mesh model. In ...
K. M. Al-Shurman, H. Naseem
The Institute for Nanoscience & Engineering, University of Arkansas, Fayetteville, AR, USA
Chemical vapor deposition (CVD) is a promising effective method for synthesis of graphene films. CVD graphene film is obtained from hydrocarbon species such as CH4 through complex catalytic chemical reactions on the surface of the catalyst. Therefore, studying the catalytic reaction kinetics is essential process for understanding the thermal decomposition rate of methane on catalyst surface as ...
Diffusion and Reaction in Fe-Based Catalyst for Fischer-Tropsch Synthesis Using Micro Kinetic Rate Expressions - new
A. Nanduri, P. L. Mills
Department of Chemical & Natural Gas Engineering, Texas A&M University, Kingsville, TX, USA
Fischer-Tropsch synthesis (FTS) is a highly exothermic polymerization reaction of syngas (CO+H2) in the presence of Fe/Co/Ru-based catalysts to produce a wide range of paraffins, olefins and oxygenates, often known as syncrude. Multi-Tubular Fixed Bed Reactors (MTFBR) and Slurry Bubble Column Reactors (SBCR) are widely employed for FTS processes. The scale-up of MTFBR is complicated by the ...
CFD Modeling and Analysis of a Planar Anode Supported Intermediate Temperature Solid Oxide Fuel Cell - new
N. Lemcoff, M. Tweedie
Rensselaer Polytechnic Institute Hartford, Hartford, CT, USA
Enthone, West Haven, CT, USA
A planar anode-supported intermediate temperature solid oxide fuel cell operating on syngas fuel at 750°C was analyzed in this study. The effects of varying syngas fuel inlet compositions on species and temperature distributions, water gas shift reaction rate, potential for carbon formation and electrochemistry were considered. A 2-D COMSOL® model was developed which included separate defined ...
G. Samdani, S. Mahajani, A. Ganesh, P. Aghalayam, R. K. Sapru, D. K. Mathur
Department of Chemical Engineering, Indian Institute of Technology Bombay, Mumbai, India
Indian Institute of Technology Madras, Chennai, India
UCG Group, IRS, ONGC, Chankheda, Ahmadabad
The Thermo- Gravimetric Apparatus (TGA) is often used for kinetics determination. In TGA setup, gasification reaction may be limited by the reach (diffusion) of the gasification agent to the internal surfaces of the char particles. In addition to this, after some time, ash is formed between the bulk of the gas and the upper surface of char. The present modeling exercise is aimed at examining the ...
Modeling Heat and Moisture Transport During Hydration of Cement-Based Materials in Semi-Adiabatic Conditions - new
E. Hernandez-Bautista[1,2], D. Bentz, S. Sandoval-Torres, P. Cano-Barrita
National Institute of Standards and Technology, Gaithersburg, MD, USA
Instituto Politécnico Nacional/CIIDIR Unidad Oaxaca, Oaxaca, México
The process of accelerated curing of pre-cast concrete has a significant importance in the thermal behavior of concrete. A multiphysics model that describes hydration and heat and mass transport in cement based materials was developed. The hydration reactions are described by a maturity function that uses the equivalent time concept, thereby describing the change in the degree of hydration based ...
A. Nanduri , P. L. Mills ,
 Department of Chemical and Natural Gas Engineering, Texas A&M University - Kingsville, Kingsville, TX, USA
In the early 1920’s, Gas-To-Liquids (GTL) and Coal-To-Liquids (CTL) technologies were developed to account for the depleting crude oil resources . During this period, Franz Fischer and Hans Tropsch developed a process to convert synthesis gas (syn gas), derived from coal gasification, to a wide range of high value-added products. This process later came to be known as Fischer-Tropsch (F-T) ...
W. Beckert, M. Dannowski, L. Wagner, J. Adler
Fraunhofer IKTS, Dresden, Germany
The 3D unit cell model approach offers an efficient tool to analyze the influences of geometrical design (channel shape and arrangement, filter length, wall thickness) and filter material properties (permeability, soot loading characteristics) on the performance of ceramic particle filter structure in the soot loading process, assessed by pressure loss and soot loading capacity. It does ...