Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Empty parameter list

Posted May 19, 2011, 4:48 p.m. EDT Studies & Solvers Version 4.1 2 Replies

Haolin Zhu
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi,

I am solving a solid mechanics problem and since it is not working and is nonlinear, I am trying the parametric sweep to increase the body force slowly.

However, I am getting the error Empty parameter list but have no idea what it means and what I did wrong.

If you could shed some light on this, I would greatly appreciate.


Thanks a lot.

Attachments:

2 Replies Last Post May 23, 2011, 12:56 p.m. EDT
Henrik Kettunen
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago May 20, 2011, 7:47 a.m. EDT
I don't know anything about the actual physics you are simulating, but at least one thing caught my attention. Your parameter sweep values go from 0 to -200, that is, a negative value. Then, the step size must be -5, not +5, so that the sweep goes into the right direction.
I don't know anything about the actual physics you are simulating, but at least one thing caught my attention. Your parameter sweep values go from 0 to -200, that is, a negative value. Then, the step size must be -5, not +5, so that the sweep goes into the right direction.
Haolin Zhu
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago May 23, 2011, 12:56 p.m. EDT
Hi Henrik,

Thank you very much for the help. Indeed that is the error. I have corrected it!


Thanks again, much appreciated!

Haolin
Hi Henrik, Thank you very much for the help. Indeed that is the error. I have corrected it! Thanks again, much appreciated! Haolin

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content