Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Unit error in Electrical circuit model

Posted May 26, 2011, 3:21 a.m. EDT Low-Frequency Electromagnetics Version 4.1 3 Replies

Joaquim G. Detoni
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello,

I tryed briefly to find some topic about a possible error in the phase angle unit in the sine source in the Electrical Circuit physics in COMSOL version 4.1.

I noticed that the unit required is radians but the systems seems to really want the receive the angle in degrees.

This way it seems to work, I wonder if anyone else has noticed this?

Thanks.
3 Replies Last Post Jun 1, 2011, 4:50 a.m. EDT
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago May 26, 2011, 3:50 a.m. EDT
Hi

indeed I have also notice a few of those, many have been corrected in v4.2, to be sure I can only suggest that you report that to "support"

--
Good luck
Ivar
Hi indeed I have also notice a few of those, many have been corrected in v4.2, to be sure I can only suggest that you report that to "support" -- Good luck Ivar
L. Queval
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago May 26, 2011, 10:16 a.m. EDT
Same thing. I always try to always work in degree if possible.
Same thing. I always try to always work in degree if possible.
Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Jun 1, 2011, 4:50 a.m. EDT
Hi,
this has been fixed in version 4.2, which is being shipped as we speak.
Niklas

Hi

indeed I have also notice a few of those, many have been corrected in v4.2, to be sure I can only suggest that you report that to "support"

--
Good luck
Ivar

Hi, this has been fixed in version 4.2, which is being shipped as we speak. Niklas [QUOTE] Hi indeed I have also notice a few of those, many have been corrected in v4.2, to be sure I can only suggest that you report that to "support" -- Good luck Ivar [/QUOTE]

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content