Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Combining solver solutions

Please login with a confirmed email address before reporting spam

Hi,

I am trying to plot a 1d graph but with solution from 2 different solvers, since I have different boundary conditions.

I am only able to select one solver at a time.

Any help is greatly appreciated.

Thank you.

Shriram

1 Reply Last Post Sep 2, 2011, 3:26 p.m. EDT
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Sep 2, 2011, 3:26 p.m. EDT
Hi

the only way is to map the dat over with a coupling variable. You must note that when you write "V" or any other dependent variable name in a COMSOL field, it means in fact V(x,y,z) for any point (x,y,z) corresponding to the selected domain (respectively boundary or edge). So when you do the mapping you must ensure that you can use one selected domain/boundary and get the required nodal inforamtion to resolve corretly the variables

--
Good luck
Ivar
Hi the only way is to map the dat over with a coupling variable. You must note that when you write "V" or any other dependent variable name in a COMSOL field, it means in fact V(x,y,z) for any point (x,y,z) corresponding to the selected domain (respectively boundary or edge). So when you do the mapping you must ensure that you can use one selected domain/boundary and get the required nodal inforamtion to resolve corretly the variables -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.