Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

display problem -- no color in the wireframe

Posted Dec 14, 2011, 4:54 p.m. EST Version 4.0a, Version 4.2a 0 Replies

Ran Duan
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Dear All,

I am using comsol 4.2 RF module. If I look at the 2d plot group, the graph shows nothing but a deep blue back groud.
Right now, I just check the"coloring and style"-- "wire-frame" and look at the frame color from a distance, it's, however acceptable. This problem is still annoying when the mesh is not that fine.
This problem comes since 4.X. I think it was ok at 3.X age.
0 Replies Last Post Dec 14, 2011, 4:54 p.m. EST
COMSOL Moderator

Hello Ran Duan

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content