Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

I want to simulate magnet levitation

Posted Jan 27, 2012, 6:09 p.m. EST Low-Frequency Electromagnetics, MEMS & Nanotechnology, Acoustics & Vibrations, MEMS & Piezoelectric Devices Version 4.2 1 Reply

Jaemyung Lim
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I want to simulate magnet levitaion.
For that, at first, I placed solenoid in the bottom and place permanent magnet on the solenoid.
I tried to simulate it. However, mef and mf simulation is not enough to see force.
What kind of simulation I have to do to see the force induced on permanent magnet?

Thank you
1 Reply Last Post Jan 27, 2012, 6:13 p.m. EST
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Jan 27, 2012, 6:13 p.m. EST
Hi

I believe MF should do, MEF if you have to resolve the voltage and eddy currents

--
Good luck
Ivar
Hi I believe MF should do, MEF if you have to resolve the voltage and eddy currents -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content