Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Mesh importing

Posted Oct 6, 2012, 3:56 p.m. EDT Mesh Version 4.3 1 Reply

Roi Roded
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi,

Is't possible to import 2D mesh in dxf file format in to Comsol?
How can I import such mesh?

Regards
Roi
1 Reply Last Post Oct 9, 2012, 12:25 p.m. EDT
Erik Bornhöft COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Oct 9, 2012, 12:25 p.m. EDT
Hi,

import of 2D dxf-meshes is not supported. You can import a dxf-file as a geometry though. You can then let COMSOL create a mesh within this geometry.

You find a list of supported import/export formats at:
www.comsol.de/products/formats/

Hope that helps!

Best regards,
Erik

--
*********************
Senior Technical Sales Engineer
COMSOL Multiphysics GmbH
Berliner Str. 4
37073 Göttingen
Deutschland
Hi, import of 2D dxf-meshes is not supported. You can import a dxf-file as a geometry though. You can then let COMSOL create a mesh within this geometry. You find a list of supported import/export formats at: http://www.comsol.de/products/formats/ Hope that helps! Best regards, Erik -- ********************* Senior Technical Sales Engineer COMSOL Multiphysics GmbH Berliner Str. 4 37073 Göttingen Deutschland

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content