Heat Transfer Modeling Software for Advanced Simulation
Analyze heat transfer by conduction, convection, and radiation with the Heat Transfer Module, an add-on product to the COMSOL Multiphysics® platform. The Heat Transfer Module includes a comprehensive set of features for investigating thermal designs and effects of heat loads. You can model the temperature fields and heat fluxes throughout devices, components, and buildings. To examine the real-world behavior of a system or design virtually, easily couple multiple physical effects in one simulation with the multiphysics modeling capabilities included in the software.
Specialized Features for Heat Transfer Analyses
Conjugate Heat Transfer and Nonisothermal Flow
The Heat Transfer Module contains features for modeling conjugate heat transfer and nonisothermal flow effects. These capabilities can be used to model heat exchangers, electronics cooling, and energy savings, to name a few examples.
Both laminar and turbulent flow are supported and can be modeled with natural and forced convection. It is possible to account for the influence of pressure work and viscous dissipation on temperature distribution. Turbulence can be modeled using Reynolds-averaged Navier-Stokes (RANS) models such as the k-ε, low-Reynolds k-ε, algebraic yPlus, or LVEL turbulence models. The realizable k-ε, k-ω, shear stress transport (SST), v2-f, and Spalart-Allmaras turbulence models are available when combined with the CFD Module.
The temperature transition at the fluid-solid interface is automatically handled using continuity, wall functions, or automatic wall treatment, depending on the flow model. Natural convection can be easily accounted for when the gravity forces are enabled for nonisothermal flow simulations.
Thin Layers and Shells
For modeling heat transfer in thin layers, the Heat Transfer Module provides specialized layer models and layered material technology to easily define complex configurations and investigate heat transfer in layers that are geometrically much smaller than the rest of a model. This functionality is available for thin layers, shells, thin films, and fractures.
For individual layers, the thermally thin layer model is used for highly conductive materials in situations where the layer contribution to the heat transfer is primarily in its tangential directions and where the temperature difference between the layer sides is negligible. Conversely, the thermally thick layer model can represent poorly conducting materials that act as a thermal resistance in the shell's perpendicular direction. This model computes the temperature difference between the two layer sides. Finally, the general model provides a highly accurate and universal model, as it embeds the complete heat equations. Layered material features support similar heat loads to the regular domain model. In particular, heat sources and sinks can be defined on layers or at layer interfaces, and heat flux and surface-to-surface radiation can be defined on both sides of the shells.
When employing the layered material technology, there are preprocessing tools for detailed layered material definition, load/save of layered structure configurations from/to a file, and layer preview features. Additionally, tools are included to visualize results in thin, layered structures as if they were originally modeled as 3D solids; specifically, surface plots, slice plots, and through thickness plot are supported. The layered material functionality is included in the AC/DC Module and the Structural Mechanics Module, making it possible to include multiphysics couplings like electromagnetic heating or thermal expansion on layered materials.
The Heat Transfer Module uses the radiosity method to model surface-to-surface radiation on diffuse surfaces, mixed diffuse-specular surfaces, and semitransparent layers. These are available in 2D and 3D geometries, and in 2D axisymmetric geometries when modeling diffuse surfaces. The surface and ambient properties may depend on temperature, radiation wavelength, incidence angle, or any other quantity in the model. Transparency properties can also be defined per spectral band (and an arbitrary number of spectral bands is supported).
Predefined settings are available for solar and ambient radiation, where the surface absorptivity for short wavelengths (the solar spectral band) may differ from the surface emissivity for the longer wavelengths (the ambient spectral band). In addition, the sun radiation direction can be defined from the geographical position and time.
The view factors are computed using the hemicube, the ray-shooting, or direct integration area method. For computationally effective simulations, it is possible to define planes or sectors of symmetry. When combined with a moving frame, the surface-to-surface radiation interface automatically updates the view factors as the geometrical configuration deforms.
Modeling phase change phenomena in heat transfer analyses is easy with the Heat Transfer Module. The Phase Change Material feature implements the apparent heat capacity formulation and accounts for enthalpy of phase change as well as changes in material properties, including the ability to model volume changes and topology change.
Alternatively, the Phase Change Interface feature models phase change following the Stefan energy balance condition to compute the velocity of the interface between two phases that may have different density. Combined with deformed geometry, this is approach is a very effective method to model change when no topology change occurs.
Conduction, Convection, and Radiation Analyses
The Heat Transfer Module can be used to study the three types of heat transfer in detail, expanding the analyses that are possible with the core COMSOL Multiphysics® simulation platform.
To describe conduction that occurs in any material, you can define the thermal conductivity as isotropic or anisotropic, and it may be constant or a function of temperature (or any other model variable).
Account for the motion of fluids in heat transfer simulations. You can use features for modeling pressure work; viscous dissipation; as well as forced and free (or natural) convection.
The Heat Transfer Module enables you to model surface-to-surface radiation using the radiosity method as well as radiation in participating media using the Rosseland approximation, P1 approximation or discrete ordinate method (DOM). The P1 approximation and DOM are also available for radiation in absorbing and scattering media, to model light diffusion in a nonemitting medium, for example. You can also model a radiative beam in absorbing media radiation using the Beer-Lambert law and couple the effect with other forms of heat transfer.
What You Can Model with the Heat Transfer Module
Whether heat transfer is the primary area of focus or part of a larger, complex analysis, you most likely need to examine multiple physical effects at once. With the multiphysics modeling capabilities of the COMSOL® software, you are able to perform complete and thorough analyses in one simulation environment, following a consistent workflow across physics. This intuitive approach to modeling and simulation can be used to account for heat transfer and all of the physical phenomena involved in your application.
Browse the following applications to see a small sample of what you can analyze and simulate with COMSOL Multiphysics® and the Heat Transfer Module.
Model electromagnetic heating at different electromagnetic regimes using an electromagnetics and heat transfer coupling. The Heat Transfer Module can be used to analyze the effects of Joule heating, inductive heating, and microwave heating effects.
These multiphysics simulation capabilities are useful in the design and study of underground cables, fuses, inductors, and a wide variety of additional applications.
The Heat Transfer Module has robust interfaces for modeling heat transfer in porous media, accounting for both conduction and convection in solid and open pore phases of the porous matrix. You can select different averaging models to define effective heat transfer properties that are automatically calculated from the respective properties of the solid and fluid materials. You can also access a predefined feature for heat dispersion in porous media, caused by the tortuous path taken by fluids through the pores.
Combine the Heat Transfer Module with the CFD Module and Subsurface Flow Module to solve for porous media flow (Darcy's law and Brinkman's extension to Darcy's law) and couple it with the heat transfer model.
To model local thermal non-equilibrium, you can use the LTNE interface. It implements separate equations for the fluid and the porous matrix temperature fields with a coupling to account for the heat transfer at the fluid-solid interface in pores.
Thermal expansion is very common and can lead to very high levels of thermal stress. Thermal stress can be positive, such as for shrink fit and bimetallic temperature sensor applications, but it can also be negative. For example, it can negatively affect buildings, thus causing a need for expansion joints, as well as devices subject to high temperature ranges and cyclic thermal loads.
A good thermal design is the key to optimizing the effect of thermal expansion, either by minimizing or maximizing the effect depending on the case. This phenomenon can be accounted for and studied using the multiphysics coupling functionality in the Heat Transfer Module.
When used in conjunction with the Structural Mechanics Module, the Heat Transfer Module increases the capabilities for analyzing the thermal stress in a device, component, or system; for example, to account for conjugate heat transfer or heat transfer in thin shells.
There are models available for the contact thermal conductance coefficient, which is dependent on the contact pressure. You can also account for the surface-to-surface radiation contribution between surfaces separated by small gaps. The contact pressure and gap distance are obtained from the structural mechanics model.
You can model thermoelectric effects by coupling physics interfaces for electric currents and heat transfer in solids, and easily account for the Peltier-Seebeck-Thomson effects.
Set the material properties of a model from a selection of predefined thermoelectric materials, such as bismuth telluride and lead telluride. As always, you can also define the material properties yourself or combine the AC/DC Module with the Heat Transfer Module for advanced modeling features for electric currents.
For work involving the design of electronic devices, components such as electronic chips, or power systems, the Heat Transfer Module has the functionality to analyze cooling capacity. Simulate conduction and convection in these applications to ensure optimal performance and operation. You can also model the cooling of heat pipe designs for use in microelectronics or computers.
While analyzing electronic cooling, an efficient and accurate simulation is important to avoid malfunction and suboptimal designs. The Heat Transfer Module is both computationally efficient and accurate for computing the cooling capacity. With the heat sink parts included in the software, you can easily set up complex geometries.
Heat exchangers are involved in a variety of application areas, such as water treatment, resource refinery, nuclear power, food and beverage production, refrigeration, and more.
The Application Library contains tutorial models for the following heat exchanger types:
- Concentric tube heat exchangers
- Double pipe heat exchangers
- Shell-and-tube heat exchangers
- Compact heat exchangers
- Finned-pipe heat exchangers
Heat exchanger analysis involves a combination of heat transfer in fluids and solids. The fluid carries energy over large distances, while the solids separate the fluids so that they can exchange energy without mixing. You can account for this behavior with the available physics interfaces in the COMSOL Multiphysics® software and even model forced convection or phase change within these devices.
Thermal management is vital to the design of buildings, as building designers need to consider heat and moisture variations in building components. You can use the Heat Transfer Module to analyze thermal management in wooden frames, window frames, porous building materials, and other building components. Additionally, there are tools that can be used to analyze water condensation and evaporation on building surfaces.
In the Heat Transfer Module, there are specialized features for analyzing heat and moisture storage, latent heat effects, as well as diffusion and convective transport of moisture. Simulate convection and diffusion, as well as eddy-based turbulent mixing for heat and moisture transport in air.
You can analyze processes in medical applications — such as tumor ablation, skin probes, and tissue necrosis — with heat transfer modeling. Specific functionality in the Heat Transfer Module can be used to simulate thermal effects in human tissue.
The COMSOL® software solves for the bioheat equation and can account for thermal effects in tissues via the blood properties, blood perfusion rate, and the metabolic heat sources. Effects of microwave heating, resistive heating, radiative heating, and heating through chemical reactions can easily be included in the analysis.
Moisture transport and evaporative cooling are involved in drying and evaporation, including application areas like building physics and food processing.
In order to study these effects, the Heat Transfer Module includes settings for modeling moisture transport in air and moist porous media coupled with nonisothermal flow. The physics interface determines the saturation pressure and can account for evaporation on surfaces and porous media during the evaporative cooling process, which models the effect of the heat of evaporation on the temperature.
A dedicated model is also available to simulate heat and moisture in building material.
Run Heat Transfer Analyses Efficiently with Simulation Applications
Think of the time and energy you would be able to devote to new projects if you did not have to run repetitious simulation tests for other people on your team. With the Application Builder, built into COMSOL Multiphysics®, you can build simulation applications that further simplify the simulation workflow by enabling you to restrict the inputs and control the outputs of a model so that your colleagues can run their own analyses.
With applications, you can easily change a design parameter — such as heat rate, operating conditions, or material or geometrical properties — and test it as many times as you need without having to rebuild the entire simulation. You can use applications to run your own tests more quickly or distribute applications to other members of your team to run their own tests, further freeing up your time and resources for other projects.
The process is simple:
- Transform your complex heat transfer model into a simple user interface (an application)
- Customize the application to your needs by selecting inputs and outputs for the application users
- Use COMSOL Server™ or COMSOL Compiler™ to make them accessible to other team members
- Enable your team to run their own design analyses without further assistance
You can expand the capabilities of simulation throughout your team, organization, classroom, or customer base by building and using simulation applications.
Every business and every simulation need is different.
In order to fully evaluate whether or not the COMSOL Multiphysics® software will meet your requirements, you need to contact us. By talking to one of our sales representatives, you will get personalized recommendations and fully documented examples to help you get the most out of your evaluation and guide you to choose the best license option to suit your needs.
Just click on the "Contact COMSOL" button, fill in your contact details and any specific comments or questions, and submit. You will receive a response from a sales representative within one business day.
Request a Software Demonstration